Back

2019 New Holland Construction Compact Track Loaders C232

MoreLess
Limited Time Offer!

Selling Price -$73,500.00

No Images Available

Selling Price -

$73,500.00

HD Certified Pre-Owned
No Description is Available for this Unit
  • 2019
  • New Holland Construction
  • Compact Track Loaders
  • C232
  • Compact
  • Pre-spin on 30 microns | Main-spin on 4 microns | Air intake: Turbocharged Aftercooled with external EGR
  • FPT | Model: F5H FL463A F001
  • Diesel 4-stroke, Turbo, D.I.
  • 4
  • 3.9 in (99 mm)
  • 4.3 in (110 mm)
  • 207 in3 (3.4 L)
  • HPCR Direct
  • 2 diesel
  • Liquid
  • High idle - no load: 2500 +/- 25 rpm | Rated - full load: 2500 rpm | Low idle: 1150 +/-25 rpm
  • per SAE J1349 Gross: 74 hp (55 kW) @ 2500 rpm | per SAE J1349 Net: 68 hp (51 kW) @ 2500 rpm
  • per SAE J1349 Peak: 232 lb-ft (314 Nm) @ 1400 rpm
  • Type: Spring applied, hydraulic release disc
  • Lift cylinder: 4840 lbs (21.5 kN) Tip Limit | Bucket cylinder: 7360 lbs (32.7 kN) | Cycle time Raise: 3.9 sec | Cycle time Lower: 2.5 sec | Cycle time Dump: 2.7 sec | Cycle time Roll back: 2.0 sec
  • Low range: 5.1 mph (8.2 km/h)
  • Gear
  • Drive pump electro hydraulic: 24.2 gpm (91.5 Lpm) | Pump: 24.2 gpm (91.5 Lpm)
  • Relief: 3046 psi (210 bar)
  • Angle of departure: 32° | Dump angle: 55°
  • Bucket hinge pin: 131.1 in (3330 mm) | Dump Reach Max.: 34.4 in (875 mm) @ 45°
  • 9.5 in (243 mm)
  • 76 in (1930 mm)
  • 25.5 gal (96.5 L)
  • 8.9 qt (8.5 L)
  • System with filter: 47 qt (44.5 L)
  • Rated operating load 50% tip: 3200 lbs (1451 kg) | Rated operating load 35% tip: 2240 lbs (1018 kg) | Tipping load: 6400 lbs (2902 kg)
  • 9630 lbs (4370 kg)
  • 9300 lbs (4220 kg)
  •  Calculation is estimate only.
  •  
  •  
  •  
  •  
  •  
  •  
  •  Quotes are estimates only, actual rate may vary slightly.
  •  One-Way toll road charges will be the responsibility of the customer.
  •  Additional fees and/or duties may apply to International and non-continental US shipping requests.
  • $73,500.00
  • Byhalia, MS
  • Pre-Owned
  • 1793
  • 2019
  • New Holland Construction
  • Compact Track Loaders C232
  • NKM480814
  • Pre-spin on 30 microns | Main-spin on 4 microns | Air intake: Turbocharged Aftercooled with external EGR
  • 2 diesel
  • Available
  • Bucket hinge pin: 131.1 in (3330 mm) | Dump Reach Max.: 34.4 in (875 mm) @ 45°

Recommendations

Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Contact dealer for details.